Site icon Muchinson Digital

Error Code O8x0040154 – Guide – Steps to Fix

How to fix Error Code O8x0040154 with error message Outlook 2016 error with Windows in Outlook, 2016?

Causes of Error Code O8x0040154: Error Code O8x0040154 is an issue caused due to improper setup of the Windows and installed software. This Error Code O8x0040154 occurs when installing | opening | closing | updating | uninstalling | removing the application or Windows upgrade. 

Error Code O8x0040154 in Windows, Calendar, Moviemaker, Media, Visio, Exchange, Project, BSOD, Boot, .Net, Driver, Printer, Edge, Explorer, Scanner, Security, Microsoft Security Essentials, Live mail, Office, OneDrive, OneNote, Word, Excel, Outlook, Powerpoint, Defender, Store of version 2010, 2013, 2016, 2019 ,365 while downloading, installing, uninstalling, opening, loading, updating, closing, activating, syncing, logging, in, downloading, printing.

Solution to fix Error Code O8x0040154?

SUMMARY: For Error Code O8x0040154, like any error with a software, which is like a machine, it is investigated for overall faults and then fixed one by one. First, we check the list of software installed in Windows to relate if it can cause the mistake. Then, we check the problem logs from the event viewer to see if we can relate it to any of the known problems or applications. Next, we can cripple the applications we suspect in the first two steps and check if the fault is resolved. If the issue is not fixed, we will then disable al the security software, clean up the junk files to overrule possibility of low space in the hard drive, try a quick repair first, then a normal repair and if still not resolved, we will perform a full uninstallation and then install it again.

PLEASE NOTE: SAVE OR BOOKMARK THIS WEB PAGE LINK OR URL, AS THIS INVOLVES RESTARTING THIS COMPUTER.

Steps to fix the Error Code O8x0040154:

Table of Contents :

 

How to Clean Temp Files?

Temp files are files used to store non-permanent information}. Most of the programs store such kind of data, this will lead to reduction of freedisk space. To reclaim the disk space, we can remove the temporary files. Normally the Computer itself deletes these files, but we can also do this ourselves.

Following are a few methods used for temp file removal

Method-1-Using Temp Folder

Method-2-Using Command Prompt

Method-3-With System Settings

How to Disable Antivirus?

Antivirus is kind of application used in computers or Laptop devices for the need of scanning, detection, prevention, protection and elimination virus or bad software. In the background, these software runs automatically and provides real-time protection.

There are two types of Antivirus software in Windows Operating System, one is in-built Windows Defender and others are created by other company and gives their own unique and advanced features. Few examples for other Antivirus applications are the following:

Kaspersky, Norton, Trendmicro, Avg, Avira, Avast, McAfee, Zonealarm etc….

While installing any other applications or software, it may not be easy for Antivirus to determine whether the application or software is allowable or spiteful, So it is greate to disable Antivirus while installing any other desired software.

Each Antivirus software is unlike and you must be careful while disabling these, describing how to disable few widely using Antivirus softwares.

How to Turn off Windows Defender

Windows Defender is own Antivirus software and we could easily and simply disable this one. Below elaborated steps can be followed

 

 

Method-1-If The System Is Not Updated
  1. Click on the search bar at bottom corner of the PC and type Run or PressWindows Key + R” to open command box.
  2. A command box will pop-up and type “gpedit.msc” and press OK.
  3. Local Group Policy Editor will open up, from that select on Administrative templates.
  4. From dropdown select Windows Components and scroll down to find  Windows Defender Antivirusclick on that.
  5. Settings menu will show up, from that double select  Turn off Windows Defender Antivirus.
  6. There will be three options like Not configured, Enabled & Disabled.
  7. Click on Enabled and select apply and then OK.
  8. Now, close all the Windows and restart Computer. Now, the default Antivirus Windows Defender will be turned off.
Method-2-Using Settings ( Temporary )
  1. Click on the windows icon on the left bottom corner of the PC.
  2. Select Settings tab and from that select Update & Security tab.
  3. In Update & Security menu from the options given on left side select Windows Security.
  4. In Windows Security , at the top Select on open Windows security button.
  5. There on, this window we could see so many options from that select each one and turn them off.
  6. Click on Virus & threat protection and under Virus & threat protection settings, click on Manage Settings and turn off Real-time Protection. Please note that this is temporary and once you have restarted your Computer, it will turn on automatically.
  7. Then on the left side given menus select Firewall & network protection from its menu you will see options like Domain network, Private Network, Public Network Select each one and turn them off.
  8. Now the default Antivirus Windows Defender would be turned off temporarily.
Method-3-Using Registry Editor ( Permanent )
  1. Click on the search bar at bottom corner of the Computer and type Run or PressWindows Key + R” to open command box.
  2. A command box will pop up and type “regedit” and click and then click YES on the pop-up, you will get Registry Editor.
  3. From Registry Editor, click on HKEY_LOCAL_MACHINE from drop down click on SOFTWARE and then click on policies and then click on Microsoft and then Windows Defender.
  4. You will see Default file on the right hand side of the window. In that window, right click on any empty space, you will get an option says New and from that select ” DWORD (32bit) bit ” and you will get an option to rename that , Rename that as ” DisableAntispyware “. It will listed under Default file as a new one.
  5. Once done creating DisableAntispyware click on that and will get a pop-up which will show options to change its values , so then change the value to ” 1 ” by removing ” 0 ”  and then click ok and then restart Computer.
  6. Now, your Windows Defender will be turned off permanently.

How to Disable Kaspersky Antivirus

Method-1-From Taskbar
  1. On the taskbar, search for the Kaspersky symbol, it may be like green shield with a check mark
  2. If you are not able to find symbol there, click on the icon tray which shows hidden icons at the right bottom corner of the PC
  3. Right Click on the Kaspersky icon , A menu will pop-up there from that select Pause Protection
  4. On Pause Protection, you will get three Pause options pause for particular time (here you could choose time), Pause until application restarts and Pause
  5. Now, you have successfully turned off the Kaspersky Antivirus.
Method-2-Using Main Application Window
  1. Click on the Kaspersky application main window to launch it
  2. From the main menu, click on the Protection and Control tab and select Protection tab
  3. On Protection, right click and you will get another menu to select disable/enable Antivirus
  4. To disable Kaspersky Antivirus, select the Stop option from the menu.
  5. Now, you have successfully turned off the Kaspersky Antivirus.
Method-3-Using Application Settings Window
  1. Select Settings Window and click to open it.
  2. At the left end of the window, there will be Antivirus protection section, select Antivirus tab.
  3. At the right end of that window, there will be the File Antivirus section.
  4. Turn off Enable File Antivirus button and click on Save to save changes
  5. Now you have successfully  disabled the Kaspersky Antivirus.

How to Turn off McAfee Antivirus

Method-1-From Taskbar
  1. On the taskbar, search for the McAfee icon. It may be dark red in color
  2. If you are not able to find icon there, click on the icon tray which shows hidden icons at the right bottom corner of the PC
  3. Right Click on the McAfee icon, a menu will appear there from that press Change settings
  4. Click on Change settings you will get a Menu, from that select|click|press} Real-time Scanning
  5. MacAfee Antivirus Application will open and appear with options to turn on or OFF Real-time Scanning 
  6. At the right  side of the window, click on Turn Off and another window will pop-up and, in that, at the left side of the window on a text box, you can choose when to resume Real-time scanning.
  7. After choosing the time at the right side of the window, there will be a blue Turn off  button. Click on that and close the window.
  8. Then, repeat steps 2 and 3 below Real-time Scanning. You will get Firewall option, Click on that.
  9. Click on Turn Off button and choose time and turn off firewall.
  10. Now, you have successfully disabled the McAfee Antivirus.
Method-2-Using McAfee Application
  1. Click on the search bar at bottom corner of the PC and type McAfee  the installed application will open.
  2. On main window of McAfee Antivirus software at the right top corner, you can see the Settings icon. Click on that.
  3. In Settings under the dropdown, select Real-time Scanning under PC Security Section.
  4. At the right  side of the window, click on Turn Off and another window will pop-up. In that, at the left side of the window on a text box, choose  when to resume Real-time scanning.
  5. After choosing the time at the right side of the window, there will be a blue Turn off  button. Click on that and close the window.
  6. Then, select Firewall tab below Real-time Scanning tab under PC Security section.
  7. At the right  side of the window, click on Turn Off and another window will appear. In that at the left side of the window on a text box you can choose,  when to resume Firewall.
  8. After choosing the time at the right side of the window, there will be a blue Turn off  button. Click on that and close the window.
  9. Now, you have successfully turned off the McAfee Antivirus.
Method-3-Using System Configuration 
  1. Click on the search bar at bottom corner of the PC and type Run or Press “Windows Key + R” to open command box.
  2. A command box will pop-up and type “msconfig” and click YES on the pop-up, you will get System Configuration.
  3. From System Configuration at the Top menu bar, click on Services.
  4. At the bottom left corner of this window, check for ” Hide all Microsoft services“.
  5. Under Services, scroll down and uncheck all the services related to McAfee and click OK, then click on Restart.
  6. Your Mcafee Antivirus will be turned off after the restart.

How to Disable Norton Antivirus

Method-1-From Taskbar
  1. On the taskbar, search for the Norton symbol,
  2. If you are not able to find icon there, click on the icon tray which shows hidden icons at the right bottom corner of the PC.
  3. Right Click on the Norton icon , A menu will appear from that, click Disable Auto Protect.
  4. A menu will appear, choose the duration and then select OK.
  5. Again, right click on the symbol from the taskbar and press Disable Smart Firewall.
  6. A menu will appear, choose duration and then press OK.
  7. Now, Norton Antivirus will be turned off.

How to Disable Avast Antivirus

Method-1-From Taskbar
  1. On the taskbar, search for the Avast icon.
  2. If you can’t find icon there, click on the System tray, which shows hidden icons at the right bottom corner of the PC.
  3. Right Click on the Avast icon , a menu will appear from that click Avast Shield Control and then click on Disable Permanently
  4. Avast Antivirus will be disabled.
Method-2-From Main Application
  1. Click on the search bar at bottom corner of the PC and type Avast  the installed application will open.
  2. On main window of Avast Antivirus software at the right top corner, you can see the Menu icon. Click on that.
  3. Select Settings tab at right side, click on Protection and then click on Core Shields.
  4. Scroll down and click on File Shield under Configure Shield Settings and uncheck Enable File Shield and choose the duration or Stop indefinitely  from the pop-up.
  5. Click on next tab Behavioral shield and uncheck Enable File Shield and choose any duration or Stop indefinitely  from the pop-up.
  6. Then Click on the next tabs Web shield and Mail shield and for both uncheck Enable File Shield and choose theduration or Stop indefinitely.
  7. Simply at the top of the window you can turn off Core shield and choose theduration or select Stop indefinitely.
  8. Avast Antivirus will be disabled.

How to Disable Avira Antivirus

Method-1-From Taskbar
  1. On the taskbar, search for the Avaira symbol.
  2. If you can’t find icon there, click on the icon tray, which shows hidden icons at the right bottom corner of the PC.
  3. Right Click on the Avaira icon, a menu will pop-up from that click Turn off real time protection and then choose the duration.
  4. Give administrative permission by clicking yes on that pop-up.
  5. Avira Antivirus will be disabled.
Method-1-From Application
  1. Click on the search bar at bottom corner of the PC and type Avira,  the installed application will open.
  2. Click on the Security tab on the left pane and click Protection options .
  3. Click Turn off  under Real time protection and from appearing window choose time and click on blue color Turn off tab.
  4. Do the same for all under Protection options.
  5. Avira Antivirus will be disabled.

 

How to Check Windows Updates?

To keep your Windows Device Sooth, Fast and Secure , The system has to be updated. Once in a while Microsoft provides Particular Updates.

Windows Update issues

while updating Windows, you may face some issues like  Interruption, slowness, or it may end up with Some error codes. You can try these Troubleshooting steps.

  1. We need to avail some space first.
  2. Click on the Windows Key at the left bottom corner of your Pc and  choose Settings.
  3. From Settings Menu, click System tab and click to open.
  4. From the System window at the left side of window, choose storage tab.
  5. Open storage tab and you will see available Local disks, from that available local storage select the one one you want to clean up.
  6. From storage options, select and open Temporary files.
  7. From the listed files select items to be deleted and click Remove files.
  8. Save and Close all the finished and unfinished works and restart the Computer.
  9. Check for Windows updates , Restart the PC again.
  1. Keeping wanted hardware, unplug or disconnect unnecessary hardware.
  2. On search bar, type Device Manager and click to open it.
  3. Click on dropdown for each tab and check for Caution/warning symbol, it might be an exclamation mark inside a yellow triangle.
  4. If you can find any device with that , right click on that and choose Update driver
  5. Check for Windows updates , Restart the Computer again.
  1. To get the most updated troubleshooting tool, type “aka.ms/wudiag” on the search bar.
  2. Click Open and run the file, then click Next.
  3. From the next window, click Apply this fix.

How to Repair Microsoft Office?

 

Microsoft Office is a productivity application which consists of applications like Microsoft Word, Microsoft Excel, Microsoft PowerPoint, Microsoft OneNote, Microsoft Outlook, Microsoft Publisher, Microsoft Access, Skype for Business, Microsoft InfoPath. Office applications Plays major part in creating, analysing and modifying various documents in our day to day life. It helps Home as well as Business users to improve or ease tasks as well as productivity.

Microsoft Office Applications

Microsoft Office Repair

Office applications may undergoes somany difficulties, We may face errors while installing or Running. We could try options like quick repair or online repair as a basic solution for such kind of issues.

 

Office Quick Repair / Online Repair
  1. Click on the Windows Icon on the left bottom corner of the Pc. fFom the left pane, click Settings.
  2. Click on Apps and select Apps & Features from the left pane.
  3. Scroll down and select Microsoft Office version you have and click on “Modify“.
  4. Before modifying, do not forget to close all Office applications.
  5. A window will pop-up. From that, choose Quick repair (repairs without internet)/ Online Repair (repairs with internet).
  6. You cannot access any Office application while repairing.
  7. Once the repair is complete, you will get a message. Then, close all the window and restart your Computer.

Microsoft Office uninstallation

  1. To uninstall Office , we can} use Office uninstall Support tool. click on the download button to get the tool from Microsoft Official website.
  2. The tool will be downloaded and it will be available in the downloads folder. Right click on that and run it as administrator.
  3. Select the Office version and click Next.
  4. Few pop-up windows will appear, follow the instructions and then restart your Computer.
  5. Once restart completes, the uninstall tool launches again and finishes the final repair.
  6. Then select the Office version you want to install or reinstall then close all the window.

Microsoft Office Installation
  1. Visit https://www.Office.com from your favorite browser or select here .
  2. Office available for both Home as well as Business use, you can compare the pricing and packages included on Official Ms Office Website mentioned above  by clicking Get Office
  3. You will get Microsoft Office Home page, click Sign in if you already have Office subscription.
  4. Enter your Username and Password, click sign in. You will be redirected to authenticated window of Office . you will see a Install Office button over there, click on that.
  5. It will lead to Install page , click on Install Office button under Install Office on your computers tab.
  6. You will get a pop-up menu, there you can select language as well as versions by choosing other options, then click install. This is for Microsoft Office 365 and Microsoft Office 2021.
  7. If you are about to install Office versions like Microsoft Office Office 2019, 2016, 2013 etc… with your Product key, Go to, https://setup.office.com/ or click here.
  8. There you will see three easy steps to finish the task.
  9. First, sign in to your Office account and then enter your product key. After that simply download Office Setup.
  10. The Setup file must be in downloads folder, right click on the file and select Run as administrator.
  11. Click YES on prompt menu, for administrative permission. Allow the installation to run.
  12. Once the installation completes, you will get the message “You’re all set! Office is installed now” and click close.

Microsoft Office Activation
  1. Search and choose any Office Application. For Example open Word.
  2. You could see a license agreement when the app opens for the first time, Accept that and your Office will be ready to use.

In case you need help with fixing this, do not hesitate to contact us by clicking on the link below: https://chat.muchinsonelectronics.com

  • Error Code 0x8004fe22 – Guide – Steps to Fix
  • Error Code 0x80070781 – Guide – Steps to Fix
  • Error Code 0x80070007 – Guide – Steps to Fix
  • Error Code 0x800706B5 – Guide – Steps to Fix
  • Error Code 0x800700b – Guide – Steps to Fix
  • Error Code 0x80072F0F – Guide – Steps to Fix
  • Error Code 30045-45 – Guide – Steps to Fix
  • Error Code 0x800CCC13 – Guide – Steps to Fix
  • Error Code 0x8004042B-0x2000D – Guide – Steps to Fix
  • Error Code 6801 – Guide – Steps to Fix
  • Error Code 0x080070643 – Guide – Steps to Fix
  • Error Code 0x8000404 – Guide – Steps to Fix
  • Error Code 0x80070bc2 – Guide – Steps to Fix
  • Error Code 80072ee5 – Guide – Steps to Fix
  • Error Code 0x80072746 – Guide – Steps to Fix
  • Error Code 0x1900101-0x30018 – Guide – Steps to Fix
  • Error Code 0x800700A4 – Guide – Steps to Fix
  • Error Code 80071126 – Guide – Steps to Fix
  • Error Code 0fc80003fd – Guide – Steps to Fix
  • Error Code 0x8004de25 – Guide – Steps to Fix
  • Error Code 0x8004de8a – Guide – Steps to Fix
  • Error Code 2902 – Guide – Steps to Fix
  • Error Code 80070BC9 – Guide – Steps to Fix
  • Error Code 0x8104000d – Guide – Steps to Fix
  • Error Code 0x000014c – Guide – Steps to Fix
  • Error Code 800736cc – Guide – Steps to Fix
  • Error Code 0x004f01f – Guide – Steps to Fix
  • Error Code 0xE40200B4 – Guide – Steps to Fix
  • Error Code 0x00000105 – Guide – Steps to Fix
  • Error Code 0xC1900101 – Guide – Steps to Fix
  • Error Code 80070490 – Guide – Steps to Fix
  • Error Code 0x800704CF – Guide – Steps to Fix
  • Error Code 30035-2009 – Guide – Steps to Fix
  • Error Code 0xc004b100 – Guide – Steps to Fix
  • Error Code 0x8007232b – Guide – Steps to Fix
  • Error Code 0x80000004 – Guide – Steps to Fix
  • Error Code 0xc00000fd – Guide – Steps to Fix
  • Error Code 0xE000004A – Guide – Steps to Fix
  • Error Code 80041004 – Guide – Steps to Fix
  • Error Code 0x8007232C – Guide – Steps to Fix
  • Error Code 1603 – Guide – Steps to Fix
  • Error Code 0x80040305 – Guide – Steps to Fix
  • Error Code 0x8000FFFF – Guide – Steps to Fix
  • Error Code 0xc0000225 – Guide – Steps to Fix
  • Error Code 0x8004ff06 – Guide – Steps to Fix
  • Error Code 0x80071AB0 – Guide – Steps to Fix
  • Error Code 0x8030002f – Guide – Steps to Fix
  • Error Code 0x80016ba – Guide – Steps to Fix
  • Error Code 0x800ccc78 – Guide – Steps to Fix
  • Error Code 0x80073B0F – Guide – Steps to Fix
  • Error Code 0x800CCC0F – Guide – Steps to Fix
  • Error Code 0x8e5e021f – Guide – Steps to Fix
  • Error Code 0x80005000 – Guide – Steps to Fix
  • Error Code C80001FE – Guide – Steps to Fix
  • Error Code 0x80041315 – Guide – Steps to Fix
  • Error Code 0x80010004 – Guide – Steps to Fix
  • Error Code 0xE0190193 – Guide – Steps to Fix
  • Error Code 3200 – Guide – Steps to Fix
  • Error Code 0x80070007 – Guide – Steps to Fix
  • Error Code 30029-27 – Guide – Steps to Fix
  • Error Code 0x00000709 – Guide – Steps to Fix
  • Error Code 0x800F0830 – Guide – Steps to Fix
  • Error Code 0x80131505 – Guide – Steps to Fix
  • Error Code 0x0000142 – Guide – Steps to Fix
  • Error Code 0x645 – Guide – Steps to Fix
  • Error Code 0xE4020017 – Guide – Steps to Fix
  • Error Code 0x00000139 – Guide – Steps to Fix
  • Error Code 0x800703F9 – Guide – Steps to Fix
  • Error Code 80073712, 8024200D and 800B0100 – Guide – Steps to Fix
  • Error Code 3343 – Guide – Steps to Fix
  • Error Code C1900101 – Guide – Steps to Fix
  • Error Code 0x800700B7 – Guide – Steps to Fix
  • Error Code 0x80042468 – Guide – Steps to Fix
  • Error Code 8007041D – Guide – Steps to Fix
  • Error Code 2503 and 2502 – Guide – Steps to Fix
  • Error Code 0x6431603 – Guide – Steps to Fix
  • Error Code 0x8019019a – Guide – Steps to Fix
  • Error Code 0x0072ee7 – Guide – Steps to Fix
  • Error Code 0x80070425 – Guide – Steps to Fix
  • Error Code 0x800ccc0b – Guide – Steps to Fix
  • Error Code 80092004 – Guide – Steps to Fix
  • Error Code 0x80070658 – Guide – Steps to Fix
  • Error Code 0x800401E4 – Guide – Steps to Fix
  • Error Code 25004 – Guide – Steps to Fix
  • Error Code 0x80248007 – Guide – Steps to Fix
  • Error Code 0x80073CF0 – Guide – Steps to Fix
  • Error Code 0xC00D36D5 – Guide – Steps to Fix
  • Error Code 0x800706F4 – Guide – Steps to Fix
  • Error Code 0x8004011 – Guide – Steps to Fix
  • Error Code 0x8500202 – Guide – Steps to Fix
  • Error Code O8x0040154 – Guide – Steps to Fix
    Exit mobile version